New scan spray that temporarily mattes shiny parts without covering the surface
AESUB transparent is a new scan spray that temporarily mattes glossy surfaces with a transparent film. This allows optical scanners to capture not only the surface contours but also the color values of the measured object at the same time. As traditional scanning sprays produce a white coating, capturing color information has not been possible when using previous spray variants.
AESUB transparent does not contain any pigments and is also free from titanium dioxide, which is hazardous to health. The spray creates a layer thickness of approximately 8 to 15 µm. The coating evaporates after approximately four hours with no cleaning required. Similar to the other sublimating AESUB scanning sprays, AESUB transparent can be applied directly on spot of scanning.
AESUB transparent is used in 3D scanning when – besides dimension and contour – also the color information of an object shall be captured. Especially in reverse engineering of complex parts with extensive color information, AESUB transparent significantly simplifies and accelerates the scanning process.
Reference points, such as the AESUB dots, also adhere to the transparent matting layer and can be easily removed again after scanning.
www.aesub.com
About AESUB:
Scanningspray Vertriebs GmbH, Dortmund, founded in 2018, specializes in the development and production of scanning sprays. With in-depth know-how in 3D scanning and aerosol development, AESUB products are continuously developed to enable faster, more efficient and more accurate 3D scanning processes.
