CONTROL innovation AESUB green

CONTROL innovation AESUB green

Scanning of large reflective surfaces made easy.

New sublimating scanning spray is applied to large areas using a spray gun
The scanning spray AESUB green has been specially developed for matting large surface areas. Using a spray gun, the spray is applied to large-sized, shiny surfaces of e.g. car bodies, aircraft fuselages or the sides of boats. Within just a few seconds, a matt, white, homogenous layer with a thickness of approx. 10-20 μm is generated. Reference points adhere to the touch-dry, sprayed layer. After six hours, the applied layer sublimates automatically and the surfaces do not have to be cleaned.


AESUB green is applied to a Cessna fuselage using a spray gun. The spray vaporises automatically after six hours. Photo: AESUB


Because AESUB green is provided in the form of containers, the spray gun can be quickly refilled. AESUB green does not contain any pigments or titanium dioxide, meaning it poses no risk to health.


Topping up the spray gun with AESUB green.
The spray layer sublimates after approx. six hours. This means that no cleaning of the sprayed surfaces is required.


www.aesub.de

CONTROL: Hall 3, Booth 3205 (AESUB) + Hall 4, Booth 4218 (a3Ds)

About AESUB:

Scanningspray Vertriebs GmbH, Dortmund, founded in 2018, specialises in the development and manufacture of scanning sprays. With an in-depth knowledge of 3D scanning and aerosol generation, the AESUB products are continuously being developed so as to enable faster, more efficient, and more precise 3D scanning processes.    

Share

Written by:

1,458 Posts

View All Posts
Follow Me :

Leave a Reply

Your email address will not be published. Required fields are marked *